A gutter machine makes it possible to create any length of gutter in a matter of minutes.

If you were to interview a number of construction workers who work in the home construction industry, they’d tell you that one of the most difficult parts of their job is hanging gutters on a nearly-completed home. Sure, putting up the home’s frame, drywall, and flooring takes more time, but there’s something about hanging gutters that’s particularly challenging. It can be a frustrating job, and it’s usually one that most home builders would rather pass on to someone else.

There are three things about hanging a gutter that make the job difficult. Firstly, all of the work has to be done on a ladder, and working on a ladder is hard. It’s not like working on your own two feet. You have to stand in one place, namely the ladder, and then reach above your head, in back of you, and out in front of you to do the work you’re trying to do. It’s tiring to constantly be reaching all around you, and it’s hard to maneuver things properly when you can’t move your feet and get in their right position. Secondly, making sure that a long piece of gutter is hung evenly is hard, and it usually takes a few people up on ladders and someone on the ground telling them if the gutter looks right. Finally, hanging gutters is a difficult job because you can never find a piece of gutter that’s the right length. Most pre-made gutters come in certain sizes, so home builders are constantly having to gut pieces in half to make the gutters fit the dimensions of the home. It’s painstakingly slow work, and it can take an entire afternoon just to hang the gutters on a single home.

Fortunately, companies like New Tech Machinery developed a machine that makes the process much easier. Their creation is what’s known as a gutter machine, and it allows home builders to create gutters of any length. Rather than having to cut multiple pieces of prefabricated gutter to fit onto a home, builders can simply measure the dimensions of a home, and then they can create gutters exactly that length with a seamless gutter machine.

How it works is rather simple. The gutter machine takes a coil of material, typically aluminum, and it bends it and forms it into a gutter. All the home builder has to do is put the coil of aluminum into the machine, turn it on, and then watch the gutter come out the other side. In order to create a gutter of a certain length, they either load a coil of that length into the machine or they turn the machine off once the gutter coming out the other end is the right length. If it sounds incredibly simple, that’s because it is, but the amount of time that a gutter machine can save a home builder is immense. So if you’re in the home construction industry and you’re tired of fighting with gutter pieces of insufficient lengths, purchase a gutter machine and never mess with this issue again.